DW38CNC-2A-1S is a programmable CNC two-axis 38-type single-layer CNC pipe bending machine made by Zhangjiagang Junhang Machinery Equipment Co., Ltd. in accordance with international standards. The equipment has the support of drawing and bending + data, which is suitable for in-pipe products Processing. bend
DW38CNC-2A-1S is a programmable CNC two-axis 38-type single-layer CNC pipe bending machine made by Zhangjiagang Junhang Machinery Equipment Co., Ltd. in accordance with international standards. The equipment has the support of drawing and bending + data, which is suitable for in-pipe products Processing.
Equipment function requirements of pipe bender manufacturers:
1. The equipment has the function of pulling and bending + data
2. The movement speed of the two axes uses "pulse" acceleration and deceleration technology, the machine runs fast and smoothly.
3. Working noise≤80dB
4• Cumulative counting of the number of bends.
5. The text flashing on the screen is in Chinese and English, during which the Chinese requirement is simplified Chinese.
6. All data is entered by touching the screen.
7. Can set whether to wear core, round tube and non-round tube pinch and direct delivery operation form.
8. There is an automatic oil filling system for threading the core and the function of early core withdrawal (specific).
9. Can record (in hard disk) the name and number of monthly production procedures.
10. The printer can be connected to print the revised data into a report.
11. Data can be stored on hard disk and software.
12. The value of one point (XYZ value) and one bend (YBC value) can be penetrated from it.
13. The values of one point (XYZ value) and one bend (YBC value) can be deleted from it.
14. Data can be reversed (XYZ value)
15. The length of the first bend can be automatically calculated
16. Every turn can set the action order (the action order is eight kinds:)
(1) Feeding→backward turning→tilting (2)(feeding+backward turning)→tilting
(3) (Feeding + Retreat + Tilt) (4) Feeding → Tilt → Retreat
(5) (Feeding + Tilt) → Retreat (6) Retreat → Feeding → Tilt
(7) Tilting → retreating → feeding (8) retreating → (feeding + tilting)
17. The setting value, compensation value and speed of each turn can be set independently.
18. Any opportunity can be paused in full-automatic mode, press the start button to continue the operation.
19. Can flash multiple languages (open)
20. Recall that the capacity can store 200 sets of elbow file data (ie the processing data of 200 parts).
21. After the data correction is completed, there is a key lock function to prevent the data from being arbitrarily corrected.
22. With the function of recalling power failure, the data can always be saved.
23 Operation includes manual, semi-automatic, fully automatic and fully automatic decomposition action operation forms.
24. When you try to bend, you can choose to manually disassemble the action, investigate the action and point, and correct the action.
25Each bend can be set with three axes of feeding, retreating, and rotating tube to act together or diverge, to avoid interference, and then improve the production efficiency.
26 It has the function of measuring the tortuous spread ratio of the pipe fittings (in the case of the direct feed method), which is convenient for the calculation of the actual consumption length of the pipe fittings.
27 has a counting function for the workpiece.
28 has the function of zeroing together with four axes.
29. The machine has a communication interface and a modem. Long-distance monitoring, shortcomings cleaning, etc. 30. The operating manual of each CNC pipe bender includes (device habit repair operation manual, wearing parts list, hydraulic principle diagram, electrical principle diagram, mold diagram)
1. The quality warranty period of the hydraulic pipe bender is 12 months after passing the inspection. During this period, the equipment has shortcomings and damages, and the supplier is responsible for repairing the site free of charge
2. During the warranty period, after receiving the service request notification, promptly answer the phone call. The repair personnel will arrive at the site within 24 hours. During the warranty and after-sales service, the repair personnel will not clean the defects and cannot be evacuated until the satisfaction is terminated
3. After the warranty period expires, after receiving the notice to request service, we will answer the phone in time. The repair staff will arrive at the site within 24 hours. The repair materials will be charged at a preferential price, repair labor will be exempted, and transportation expenses will be reimbursed according to practical expenses.
Jun 23, 2020
Jun 17, 2020