38CNC CNC automatic pipe bending machine 3A-1S operation and application specifications:

1. Before operation, first check whether the smooth points are short of oil, whether the movement mechanism is loose, and whether the safety protection equipment is reliable. It can be operated only after confirmation.

2. Start the oil pump, whether the system pressure is kept within the rules, if it is high, it will harm the hydraulic components, spoil the power supply, if it is too low, it will affect the operation.

3. Adjust the required orientation and required angle of the parts.

4. Adjust the positioning of the machine to the required length.

5. Adjust the vertical lifting rails so that the guide mold pressing cylinder can clamp the iron pipe tightly.

6. The clamping cylinder can clamp the iron pipe.

7. In normal operation, put the workpiece into the zigzag mold, and touch the front end to locate it, and then press the foot switch to complete.

8. When there are twists and turns, you should gather your thoughts and stop putting your hands or other objects into the work area. In case of emergency, press the emergency stop button, and then turn the rotary switch to the manual position. Use manual reset. If something goes wrong, report it in time.

9. After the operation is completed, block the power supply and do a clean and smooth operation.