Product name: 130NC automatic hydraulic pipe bending machine Mechanical characteristics: 1. The product is controlled by NC and hydraulically driven, with a variety of pre-made bending angles. 2. Chinese subtitle display, man-machine dialogue operation, manual or semi-automatic operation can be selected at will
Product name: 130NC Automatic Hydraulic Pipe Bending Machine
Eight methods of tube bender maintenance:
One: When operating the pipe bending machine, it must be operated strictly in accordance with the operating regulations (emphasis).
Two: The pipe bender must be kept clean, please apply anti-rust grease to the unpainted parts.
Three: Add lubricating oil regularly, fixedly and quantitatively according to the requirements of the lubrication chart before starting the pipe bending machine. The oil should be clean and free of precipitation.
Four: Regularly check and repair the switch, insurance, handle, and ensure its reliable operation.
Five: The lubricating oil in the motor bearing should be replaced and refilled regularly, and the operation of the motor part should be checked regularly.
Six: Regularly check whether the V-belt, handle, knob and keys are damaged. If they are seriously worn, they should be replaced in time.
Seven: It is strictly forbidden for non-designated personnel to operate the equipment. Normally, people must leave the machine to stop.
Eight: Lubricate and clean the pipe bender 10 minutes before get off work every day.
The main influence of the zigzag forming speed on the forming quality is: the speed is too fast, it is easy to form the flat part of the zigzag part of the catheter, the roundness does not meet the requirements, and the catheter is cracked and broken; the speed is too slow, it is easy to form the wrinkle and The compression block slips, and the large-diameter tube easily forms the depression of the tortuous part of the catheter. For a large number of experiments on these two CNC pipe bending machines, it is appropriate to determine the bending speed of the catheter as 20%--40% of the bending speed of the machine. Perhaps a wheel die plus a channel can be assembled into a manual tube bender, like a pure manual tool for bending steel bars on the construction site, manpower accounts for a large proportion, as a scientist said, give him a fulcrum and be able to pry Moving the earth, the principle is exactly the same.