Pipe cutting machine MC315A manualPipe cutting machinePerformance characteristics:

The European-style high-strength machine head is equipped with a high-efficiency worm and a turbine, which makes the sawing rate high, no noise and no burrs. The feeding is manual. The head can be rotated 45°-90-45° to the left and right to make the adjustment easier. It is equipped with a manual two-way clamp, an automatic cooling system and a manually adjustable scale. No burrs, no dust, accurate, fast and smooth.

How can the laser tube cutting machine cut out a good effect?

1. The cooling system should be grounded, and the water tank and water circuit are often cleaned. The temperature control point of the cooling temperature control water tank should be fair, otherwise it will cause the laser tube to be easily damaged and the dew condensation power will drop, the cold head of the tube will fall off, the life will be greatly shortened, and sometimes it will not work. Keep changing tubes.

2. The laser tube installation fulcrum of the laser tube cutting machine should be reasonable, the fulcrum should be at 1/4 of the total length of the laser tube, otherwise the laser tube spot form will be deteriorated, and the spot will become several points for some operations for a period of time, resulting in laser power The drop could not reach the requirements, resulting in constant tube changes.

3. The water protection should always be checked and cleaned. The cooling water cannot often be flushed with the water protection float switch or the water protection float switch is not reset, and the short-circuit method cannot be used to deal with the urgent needs.