It is extremely important to use the bender in a humanized and intelligent way. It is important that the safety of the operator and the mold equipment personnel is the same as the service life of the machine. Proper use and maintenance of the machine will increase the service life of the machine. However, improper use will lead to accidents and there will be serious dangers. Faulty use of the pipe bender may not be intentional, but it will accelerate the wear of the machine parts and the degradation of various functions. There is a safety guard next to the bending arm of the machine. If a worker enters the movement plan of the bending arm, the bending arm will stop urgently when the bending arm clamps the worker, and the screen will display an alarm to avoid personnel being caught. Severe bruises.

When the pipe bending machine is in a pressing state, you can press the pressing interrupt button to interrupt the power supply to avoid the occurrence of dangerous events. After the danger is eliminated, you need to start over. Please make sure that the power supply has been turned on before starting from the beginning.

1. Press the position of the discontinuous button

On the operation panel: Pressing this button will interrupt the power supply of all motors and servos.

2. Avoid overload

Misuse of machinery and equipment will cause overload of machine parts. Excessive load may not be intentional, but it is easy to happen. This is because the torque required to bend the pipe is greater than the torque plan originally designed by the machine.

Recognize the amount of load in the operation of the machine to avoid overloading the machine components, otherwise it will affect the service life of the machine and the safety of the operator.

The greater bending ability is that the tensile coefficient of bendable general iron pipes is 40Kg/cm2.

It is necessary to abide by these technical standards, otherwise it will cause severe damage to the machine.

3. Safety exercises

Through professional pre-job practice and inspection, you can avoid the unexpected damage that may appear in the production process or reduce it to a lower degree. It is necessary for the safety practice program to be supervised and taught by leaders and managers. It is necessary for managers to maintain sensitivity to safe operations in all their work responsibility planning.

In order to achieve greater protection, proper practice is necessary. Normally, employees should be infused with the safety concept of the working environment and the operation of the machine, and the important rules of mold equipment teaching, safety equipment and operation methods, and personal safety should be emphasized in the personal safety awareness.