The metal edging and chamfering machine can not only grind the end surface of the steel plate, but also process the small faces of various metal, acrylic, and carbon carbon edging and chamfering machines. It has a multi-purpose function. Its main function is to polish and chamfer the end face of the formed sheet. According to the number of equipment grinding heads and the continuity of processing, it can be divided into a single machine and a continuous edge chamfering machine.

The first part of the list is mainly composed of grinding head organization, plate transportation equipment, slotting equipment, etc. Its overall structure is welded by section steel into the main body and fixed on the ground. In the structure, the main shaft grinding head is installed, and the grinding head and the chamfering are divided into two groups, and the two horizontal sides and the two vertical sides of the plate are processed respectively. Grinding head structure: composed of two grinding heads, chamfering the two opposite side faces of the plate. The two spindles are installed on both sides of the conveyor belt, and the working pressure of the spindle on the side of the plate is adjusted by the cylinder. Plate conveying equipment: The plate placed on the conveyor belt can rotate horizontally. The plate is conveyed by a rubber conveyor belt. The conveyor belt is trapezoidal and driven by a hydraulic reducer. The speed of the conveyor belt can be adjusted by the reducer. Slotting equipment: two or more diamond saw blades are installed at the bottom of the equipment conveyor belt. When the stone plate passes through the saw blade, this equipment can be used to groove the bottom surface of the plate, and the depth of the groove can be adjusted by adjusting the saw The height of the piece is confirmed. A control cabinet is installed beside the mill stand, which can monitor the processing progress. Automatically adjust the speed of the plate conveyor according to the plate size displayed on the control cabinet. During fixed-length grinding and chamfering, the conveying speed of the conveyor belt can be adjusted by the hydraulic transmission and displayed by the display of the control cabinet

The second part is mainly composed of conveyor belt, hair dryer, dryer, washing machine, etc. The conveyor belt is driven by an electric motor, and the plates processed on four sides are driven by the conveyor belt for subsequent auxiliary processing. When the plate passes through the blowing area, the fan scrapes and blows the upper and lower sides of the plate to remove the abrasive debris and impurities on the surface of the plate, and then the plate continues to the dry area. The dry area of ​​the chamfering machine is composed of a 1m long stainless steel sheet cover, which is equipped with a resistance heater and a hot air circulation machine to dry the surface of the plate. The board continues to move forward on the conveyor belt and is cleaned by cloth wheels.