BenderIt belongs to the category of machinery, and it is a machine with no thoughts. Therefore, we must pay attention to safety when using it to avoid accidents. Then, when using it, what points should we pay attention to to avoid risks? Let’s take a look!

The installation of the pipe bender mold is a very important task. To install the mold, the installer needs to have professional knowledge of operating the pipe bending machine and properly adjusting the bend mold, which is more important for the quality of the pipe bend. It must be noted that the mold must be suitable for the size of the equipment, but any pipe that is bent more than the original value will cause excessive load on the instrument, which will cause the mechanical performance to fail. In addition, it may also reach the personnel in operation.

Ensure good ventilation in the surrounding area. When unplugging the plug-in of the machine tool, it may be necessary to grasp the plug-in by hand to pull it out. It is not appropriate to directly pull the wire to perform the pull-out. Otherwise, the welding inside the plug-in will not be loosened and the plug-in will not be used very often. Do not hit hard objects and other fragile parts of the machine tool with hard objects, otherwise it will cause damage to the machine tool.

The working principle of the pipe bender becomes the hydraulic oil output from the electric fuel injector, which is sent into the working cylinder through the high-pressure oil pipe. The hydraulic oil urges the plunger in the working cylinder to generate thrust, and bends the pipe through the bent pipe part. The tubing can be selected according to the pressure and the operating situation. The tubing needs to have sufficient strength, the inner wall should be smooth, the clean pipeline requires short lines, and there are few turns, and the less is better, and the exhaust device is installed, which is convenient for startup. gas. The oil pipe of the elbow requires that its oil suction pipe must not leak air, nor have too much resistance in the morning to maintain the smoothness of intake or oil absorption.

Under the new technological situation, how to take the initiative to adapt to changes, expand ideas, and promote technological innovation with the spirit of reform and innovation will become a key development path that we must pay attention to.