What are the safe operation rules of the pipe bending machine? Do you know the customers and friends? The technical personnel of the pipe bending machine manufacturer will explain to us below, and we hope to help you.

1. Check the lubricating part of the bending machine. When the amount of oil is low and there is no oil, add oil.

2. When the empty vehicle is running, check whether the mechanical operation is normal and whether the electrical switch is sensitive and easy to use. After everything is normal, work again.

3. Proofread the pipe and pay attention to the safety of the surrounding area. Soak the water in the buns first, and avoid injury to the handle after a few minutes. Do not wear gloves when tapping.

4. When two people work at the same time, they need close cooperation and coordination. Special personnel should be instructed to operate the switch. During the operation, it is not allowed to talk with others to prevent malfunctions.

5. Check the surroundings of the operation site to remove any debris that interferes with the operation and traffic. There must be no oil on the ground to avoid skidding, and the workpiece codes should be neatly and sturdy to avoid collapse and damage.

6. Check whether the protective device on the bending machine is in good condition. If it is not installed, the drive is not allowed. The intermediate frequency pipe bending machine should have good grounding and electrical insulation, and the voltage should be stable.

7. When twisting and proofing the pipe, the surface should avoid the nozzle to prevent the hot sand from being damaged when the pipe is vibrated. When filling the yellow sand, the pipe should be fixed to avoid dumping. There should be no oil in the pipe, and dry yellow sand should be used.

8. During the operation of the pipe bending machine, prohibit anyone from approaching within the stroke range of the pipe bending, and set up protective warning signs. When rubbing the pipe, it should be stabilized to prevent it from being scratched by the stick.

The above is all about the safe operation rules of the pipe bender. If there is anything you don't know, you can communicate with our customer service. We sincerely serve you.